带膜微通道板的工艺和特性研究

微通道板(MCP)电子透射膜是决定Ⅲ代微光像管稳定性和可靠性的主要因素。采用有机衬底掩膜技术和冷基底溅射相结合的方法在MCP输入面制备非晶态Al2O3电子透射膜，测量了带膜MCP紫外光辐照清洗前后的电学特性。讨论在多孔MCP输入面形成连续电子透射膜与气体辉光放电的关系，工艺失败对MCP的危害性。     

污垢对冷水机组的影响

通过对两个工程实例的冷水机组测试结果对比分析，得出污垢对冷水机组造成了热阻增加，接热效果变差，制冷量减少以及制冷效率下降等严重后果，并推算出机组由此所带来的运行费用的增加。运行管理人员应该注意对机组加强清洗保养工作，以提高机组的经济运行水平。     

磷酸盐激光玻璃非激活吸收系数测量研究

介绍了高功率激光放大器系统中磷酸盐激光玻璃的静态透过率测量。在正常运行条件下,4片长按布儒斯特角放置的国产N31钕玻璃片对1.054um的激光波长平均静态透过率为94.5%,介质的损耗系数为0.294%cm-1,平均非激活吸收系数为0.146%cm-1。在此基础上对片状放大器的增益系数的测量结果进行了修正,获得了5.25%cm-1的小信号增益系数。     

Nd3+ Doped Silicate Glass Photonic Crystal Fiber with Random Hole Distributions

The fabrication of one kind of large core area Nd3 doped silicate glass photonic crystal fiber, and demonstration of the fiber's waveguidence properties were reported. This fiber owns a random air hole distribution in the cladding. The measured minimum loss of this kind of fiber is 10 dB·m-1 at 660 nm. These fibers can sustain only a single mode at least over wavelength ranging from 660 nm to 980 nm.     

Delay-insensitive codes — an overview

The problem of delay-insensitive data communication is described. The notion of delay-insensitive code is defined, giving precise conditions under which delay-insensitive data communication is feasible. Examples of these codes are presented and analyzed. It appears that delay-insensitive codes are equivalent with antichains in partially ordered sets and with all unidirectional error-detecting codes. Tom Verhoeff received the B.S. and M.S. degrees in mathematics from Eindhoven University of Technology, The Netherlands, in 1985. He is currently an Assistant Professor at the Department of Mathematics and Computing Science of the same university. His main research interests are parallel computations, especially formalisms for their specification and design, and their implementation as delay-insensitive VLSI circuits.     

基于无线传输的某型导弹实时监测与故障诊断研究

针对某型导弹武器装备系统庞大、技术密集、故障检测过程繁琐的特点,提出了一种基于无线传输技术的在线实时监测与故障诊断方案.系统中,各检测仪与各单机之间通过无线技术来实现各信号的传输,检测设备直接设计安装在装备上,从而减少了各单机检测之前的繁琐准备工作,实现了诊断过程的简单、快速化.该方案采用多级分布式处理技术,实现了检测信号的高速采集,并运用模式识别与人工智能等技术来实现设备工作状态的自动搜索与实时监测.研究表明,该技术方案能实现该型装备故障诊断的快速、准确定位与实时监测.     

河南油田潜油电泵井远程无线监控系统研制

针对河南油田研制了一种潜油电泵井远程无线监控系统。详细介绍了该系统的软硬件组成及工作原理。系统研制的主要内容包括：数据及指令传输监控软件的开发。利用SQL Server实现相关数据的管理和实时数据的网络广播；该系统在河南油田建成后．缩短了开井周期。减轻了人工劳动强度，提高了采油效率。实现了电泵井的现代化管理。     

基于Pro/ENGINEER链传动运动仿真

介绍了Pro/ENGINEER 2001的Pro/MECHANICA模块,提出了一种基于Pro/ENGI-NEER建立链传动运动模型的一般方法,对运动的模型进行简化并阐述了零件、组件的建立到运动模型建立和运动仿真的完成.同时,也提出了链传动运动模型建立的技巧.